Publicidad
Idiomas disponibles
Idiomas disponibles
38
HOWTO
USE
Steam
functions
(cont.)
LG's steam technology
allows you to inject fabrics with a swirling
jet of hot steam to refresh clothes, reduce static, simplify
ironing
and assist in the removal of
lightly
stained spots. Simply select the Steam Fresh
TM
or Spot
Clean
TM
cycle, oryou
can add a Steam option
to select cycles.
Using the Steam Fresh
TM
Cycle
Steam Fresh
TM
uses the power of steam alone to quickly reduce
wrinkles and odor in fabrics. It brings new life to wrinkled clothes
that have been stored for an extended time and makes heavily
wrinkled clothes easier to iron. Steam Fresh
TM
can also be used to
help reduce odors in fabrics.
,- @ NOTE
• Reduce Static or Easy Iron options
can also be used during
the Steam Fresh
TM
cycle.
• Depending
on the load (quantity
of items), you may change
the amount
of time for the cycle by pressing the More Time or
Less Time button.The
display will show 3, 5, or bl 9 •3 means
3 or fewer items,
5 is for 4 or 5 items, and
bl 9
indicates
a large load such as a comforter.
To Use the Steam Fresh
TM
Cycle:
1. Turn on the dryer and turn the cycle selector
knob to select the
Steam Fresh
TM
cycle.
2.To add an option function,
select Reduce Static, Easy Iron, or
Wrinkle
Care.
3. Depending
on the load (quantity
of items), steam time can be
changed
by pressing the MoreTime
or LessTime
buttons.
4. Press Start/Pause
button
to start the cycle.
To Add STEAM to a Standard
Cycle:
1. Turn on the dryer and turn the cycle selector
knob to select the
desired cycle.
2. Use the cycle setting
buttons
to adjust the settings
for that
cycle.
3. Press the Steam option
button
for the Steam option you would
like to add. Then adjust for the load size using the More Time or
Less Time buttons.
4. Press Start/Pause
button
to start the cycle.
Using the Steam Options:
The Reduce Static option
injects
steam late in the drying
cycle
to reduce the static electricity
caused by dry fabrics rubbing
together.
Change the amount
of time for the cycle by pressing the
More Time or Less Time button,
depending
on the load (quantity
of items). The display will show the recommended
number of
items, such as 7, 9, 11,14, 16, or 18.
The Easy Iron option
provides
uniform,
properly
dampened
fabrics for ironing, which can save time and make ironing easier.
Change the amount
of time for the cycle by pressing the More
Time or Less Time button,
depending
on the load (quantity
of
items). The display will show the recommended
number
of items,
such as 1,2, 3, 4, or 5.
,- @NOTE
• When Sensor Dry is selected with the Reduce Static option, a
Dry level of Les or Damp cannot
be selected.
• The Reduce Static or Easy Iron option
may also be selected
during Time Dry cycles.
• After the Steam option
is selected in Time Dry, the MoreTime
or Less Time buttons
will change the steam time ONLY.
• After pressing Start/Pause,
the More Time or Less Time
buttons
will be disabled.
Using the Steam Sanitary
TM
Cycle
Steam Sanitary
TM
cycle is ideal for sanitizing
non washable
items
quickly and easily using the power of steam alone. Recommend
to use this cycle for cotton and polyester
material. (Do NOT use
for urethane
foam, down feathers
or delicates
items)
Using the Spot Clean
TM
Cycle
The Spot Clean
TM
uses the power of steam to reduce wrinkles
and odor in fabrics
but also to help the stain removal solution's
performance.
Stain removal solutions
are designed
to be used for
on-the-spot
stain treatment
...... @NOTE
................................................................
• Spot Clean
TM
should
only be used on light
water-soluble
stains.
• The Spot Clean
TM
does
not perform
as well on dissoluble
stain,
non-food/drink
stain and tough/old
stain.
• The spot clean cycle must
be used immediately
after
treatment
with the stain removal
solution.
TM
To Use the Spot Clean
Cycle
1. Remove excess residue from the stain with a damp towel or
napkin.
2. Apply "Stain Removal
Solution" onto the stain.
3. Load the pre treated item into the dryer and select and start the
spot clean cycle.
Publicidad
