Descargar Imprimir esta página

LG DLEX8500 Serie Manual Del Propietário página 37

Publicidad

Idiomas disponibles

Idiomas disponibles

HOWTOUSZ 37
Custom
program
If you have a special combination
of settings that you use
frequently,
you can save these settings as a Custom Program,
* To Save a Custom
Program:
1. Turn on the dryer and turn the cycle selector
knob to select the
desired cycle.
2. Use the cycle setting
buttons to adjust the settings for that
cycle.
3. Press the cycle option
button(s)
for the option you would
like to
add. A confirmation
message will be shown in the display.
4. Press and hold the Custom Program button
for 3 seconds.
........
@ NOTE
You may save only one custom
program
ata time, Pressing
and holding
the Custom Program button
will overwrite
any
previously
saved custom
program.
E
)
To Recall
a Custom
Program:
1.Turn on the dryer.
2. Press the Custom
Program button
to select the saved cycle.
3. Press the Start/Pause
button
to start the cycle.
Sfeam
funcfions
To Fill the Steam
Feeder
1. Pull out the drawer.
t
, Drawer
2. Lift out the steam feeder.
3. Fill the steam feeder just to the filter screen.
Water
ONLY
Steam
Feeder
4. Place the steam feeder in the drawer; then push in the drawer
until it clicks into place.
.......
@ NOTE ...........................................................
Before using a Steam Cycle, the steam feeder must be filled
with water up to the MAX line. If not, the Rdd will be
displayed.
Make sure that the steam feeder is filled with water
or the drawer
is fully closed. Turn the dryer off then restart the
Steam Cycle.
• Only use water. Do not fill the steam feeder with foreign
substances,
rinse agents, or detergents.
• Before moving
the dryer, make sure the steam feeder is
empty.
• Do not use distilled
water; the water level sensor in the steam
generator
will not work.
• Be careful to put the Steam Feeder otherwise
water will be
overflow.
• Wipe up any spilled water around the Steam Feeder and the
drawer
before starting
the dryer.
• Do not fill the steam
feeder
with hot water
(over 86°F/30°C).
AWARNING
. Do not fill the steam feeder
with liquids
such as gasoline,
dry-cleaning
solvents,
or other flammable
or explosive
substances.
Failure to follow this warning
can cause serious
injury or death.
. Do not drink
water from the steam feeder.
Failure to follow
this warning
can cause serious injury or death.

Publicidad

loading

Este manual también es adecuado para:

Dlgx8501 serieDlex8500v