Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT
SAFETY
INSTRUCTIONS
7
IMPORTANT
SAFETY
INSTRUCTIONS
READ
ALL
INSTRUCTIONS
BEFORE
USE
AWARNING
For your safety, the information
in this manual must be followed
to minimize
the risk of fire or ex
property
damage, injury to persons, or death.
_losion, electric
shock, or to prevent
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
AWARNING
To reduce the risk of fire, electric
shock, or injury to persons when using this appliance,
follow
basic precautions,
including
the following:
. Do not, under
any circumstances,
cut or remove the ground
prong from the power cord. To prevent
injury to persons or
damage
to the dryer, the electrical
power cord must be plugged
into a properly
grounded
outlet.
. For personal
safety, this dryer must be properly
grounded.
Failure to do so can result in electric
shock or injury.
. Refer to the installation
instructions
in this manual
for specific
electrical
requirements
for your model.
Failure to follow these
instructions
can create an electric shock hazard and/or a fire
hazard.
. This dryer must be plugged
into a properly
grounded
outlet.
Electric shock can result if the dryer is not properly
grounded.
Have the wall outlet
and circuit checked by a qualified
electrician
to make sure the outlet is properly
grounded.
Failure to follow these instructions
can create an electric shock
hazard and/or
a fire hazard.
. The dryer should always
be plugged
into its own individual
electrical
outlet which has a voltage
rating that matches
the rating
plate. This provides
the best performance
and also
prevents overloading
house wiring
circuits which could cause a
fire hazard from overheated
wires.
. Never unplug your dryer by pulling on the power cord. Always
grip plug firmly and pull straight out from the outlet. The
power cord can be damaged, resulting in a risk of fire and electric
shock.
. Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along its length or at either
end. The power cord can melt, creating an electric shock and/or
fire hazard.
. When installing or moving the dryer, be careful not to pinch,
crush, or damage the power cord. This will prevent injury and
prevent damage to the dryer from fire and electric shock.
SAVE THESE INSTRUCTIONS
Publicidad
