Nuna Pipa lite Manual Del Usuario página 12

Head Support Height Adjustment
Shoulder harness straps must be nearest to your childs shoulders
(24).
If the shoulder harness straps are not at proper height, the child
might be ejected from the enhanced child restraint if there is a crash.
Head support must be installed at all time while using the infant
carrier. (25)
Pull the head support up or down to adjust the position. (26)
Securing Child
Use Infant Insert
We recommend using the infant insert
while the baby is under 60 cm or until
they outgrow the infant insert. The
infant insert increases the protection
for children.
After the child is placed into the seat, check whether the shoulder
harness straps are at proper height.
1
- Press the harness adjustment button while pulling the shoulder
harness to the desired length. (27)
2
- Unlock the buckle of the harnesses by pressing the red button. (28)
3
- Place the child into the infant carrier and lock the buckle. (32)
Engage the buckle. Please refer to (29)(30)(31).
4
- Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured. (33)
Make sure the the shoulder harness straps are snugly tightened.
Any belt slack reduces the safety performance of the child restraint
system.
Detach & Assemble Soft Goods
see images (34)-(50)
To re-assemble the soft goods, reverse the aforementioned steps.
9
PIPA lite Instructions
Remove the infant insert when the infant's
shoulders no longer fit comfortably.
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but do not
use abrasives or bleach. Do not use silicon lubricants as they will attract
dirt and grime.
To ensure long-lasting use, wipe this product off with a soft, absorbent
cloth after using it in rainy weather.
Refer to the care labels attached to the soft goods for washing and drying
instructions.
It is normal for fabric to color from sunlight and to show wear and tear
after a long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are torn,
broken, or missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
10
PIPA lite Instructions