Publicidad
Declaration of Incorporation in Compliance with Machinery Directive 2006/42/EC
For the following products:
Type 3241 Globe Valve
We certify that the Type 3241 Globe Valves are partly completed machinery as defined in
the Machinery Directive 2006/42/EC and that the safety requirements stipulated in Annex I,
1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4 and 1.3.7 are observed. The relevant technical
documentation described in Annex VII, part B has been compiled.
Products we supply must not be put into service until the final machinery into which it is to
be incorporated has been declared in conformity with the provisions of the Machinery
Directive 2006/42/EC.
Operators are obliged to install the products observing the accepted industry codes and
practices (good engineering practice) as well as the mounting and operating instructions.
Operators must take appropriate precautions to prevent hazards that could be caused by
the process medium and operating pressure in the valve as well as by the signal pressure
and moving parts.
The permissible limits of application and mounting instructions for the products are specified
in the associated data sheets as well as the mounting and operating instructions; the
documents are available in electronic form on the Internet at www.samsongroup.com.
For product descriptions of the valve, refer to:
-
Type 3241 Valve (DIN): Mounting and Operating Instructions EB 8015
-
Type 3241 Valve (ANSI): Mounting and Operating Instructions EB 8012
Referenced technical standards and/or specifications:
-
VCI, VDMA, VGB: Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für Armaturen, May 2018
[German only]
-
VCI, VDMA, VGB: Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für
Armaturen" vom Mai 2018 [German only], based on DIN EN ISO 12100:2011-03
Comments:
-
See mounting and operating instructions for residual hazards.
-
Also observe the referenced documents listed in the mounting and operating instructions.
Persons authorized to compile the technical file:
SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 20 December 2022
Norbert Tollas
Senior Vice President
Global Operations
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt am Main, Germany
14-10
Peter Scheermesser
Director
Product Maintenance & Engineered Products
Revision no. 01
Page 1 of 1
EB 8015 ES
Publicidad
