Descargar Imprimir esta página

cecotec CLEANFRY 3000 PROFILTER Manual De Instrucciones página 38

Freidora eléctrica
Ocultar thumbs Ver también para CLEANFRY 3000 PROFILTER:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 28
ENGLISH
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Official Cecotec Technical Support Service
immediately.
-
Always keep plastic bags, foils, and foam parts away from babies and children. Packaging
material could block the airways.
-
Clean the appliance thoroughly before using for the first time (see "Cleaning and
maintenance" section).
-
Make sure that the appliance is switched off and unplugged from the mains before
cleaning.
-
To clean it, open the lid and remove the basket. Wipe the inside of the lid, basket, and oil
container with a damp cloth and dry thoroughly.
Warning:
-
The appliance may produce an odour and emit smoke when switched on for the first time,
as residues from the production process are eliminated. This is normal and does not
indicate a defect or hazard. Ensure good ventilation.
-
Place the appliance on a clean, flat, and heat-resistant surface.
-
Make sure the basket handle (7) is locked in place in the frying basket (6). To lock the basket
handle (7) in place, press the bars together and slide them between the slots. Once the
ends of the bars are inserted in the bracket on the frying basket (6), push the handle (7)
backwards. Do not assemble any other way.
-
Make sure the oil tank (9) is secured in the correct position with the oil filter cover (11) and
oil valve (12) on the same side than the oil filtration knob (14) (il. d).
-
Ensure the oil filter cover (11) is in place inside the oil tank (9).
-
Make sure the control panel unit (21) is placed on the connecting plate on the back of the
housing (13). Ensure the grooves of the connecting plate are in the guides of the control
panel unit (il. e).
3. OPERATION
Warning:
Your appliance is equipped with a safety switch (5) located on the control panel unit (21). The
appliance will only operate when the control panel unit (21) is correctly installed.
Note:
-
Before plugging it into the wall outlet, ensure that the electrical circuit is not overloaded
with other appliances.
38
CLEANFRY 3000 PROFILTER

Publicidad

loading

Este manual también es adecuado para:

03077