cecotec CLEANFRY 3000 PROFILTER Manual De Instrucciones página 43

housing (13).
- Open the filter cover (28) and remove both charcoal and grease filters (26, 27) (il. u).
- Clean the housing (13) of the appliance with a wet cloth.
- Wash the lid (3), frying basket (6), basket handle (7), oil tank (9) and oil filter cover (11) with
hot soapy water or in a dishwasher. Rinse and dry carefully.
- Dry all parts thoroughly after cleaning and before using the appliance again.
- If the clean-oil container (15) needs to be cleaned, ensure it is empty before attempting to
clean. Wash with hot soapy water or in a dishwasher. Rinse and dry carefully.
- Clean the filters (26, 27) every 3 months or after every 12 uses with hot soapy water. Do not
wash them in a dishwasher.
- Dry all parts and surfaces thoroughly before use. Make sure that all parts and surfaces are
completely dry before connecting the appliance to a wall outlet. Even a small amount of
water can cause severe splattering of hot oil.
Storage
- Before storage, always make sure the appliance is completely cool, clean, and dry.
- It is recommended to store the appliance in a dry place.
- Store the appliance on a stable shelf or in a cupboard. To avoid accidents, ensure that both
the appliance and its power cord are beyond reach of children or pets.
5. TECHNICAL SPECIFICATIONS
Model: CleanFry 3000 ProFilter
Product reference: 03077
2000 W, 220-240 V~ 50/60 Hz
The appliance power consumption when off is 0.4 W, following the guidelines of EN 50564:2011
and the European regulations 1275/2008/EC and 801/2013/EC. The appliance doesn't perform
any function when connected to the mains. The switch/controller of the appliance was set to
the Off position.
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
ENGLISH
CLEANFRY 3000 PROFILTER 43