cecotec CLEANFRY 3000 PROFILTER Manual De Instrucciones página 7

power cable is damaged, it must be replaced by the Technical
Support Service of Cecotec or similar qualified personnel to
avoid risks.
- Always operate and store the appliance on a flat,
stable surface.
- Make sure the product's handles are properly assembled
and locked in place before use.
- The device is not intended to be operated by means of an
external timer or separate remote-control system.
- Always make sure the product's inner pot is correctly
installed before operating the device.
- This symbol means "Caution, Hot Surface". The
surfaces of the appliance become hot during and after
operation. Do not touch while in use.
- Allow the appliance to cool at least 30 minutes before
handling and use only heat-resistant tools. Do not use metal
tools as they may become hot.
- Always unplug the appliance while not in use before cleaning
and before carrying out maintenance tasks.
- The use of accessories or parts not provided or recommended
by Cecotec may result in fire, electric shock, or injuries to
persons and to the product.
- Do not let the cable hang over the edge of the working surface
or worktop and prevent it from touching hot surfaces.
- Do not use outdoors, near a gas or electric hob, in heated
ovens, or near open flames.
- Extreme caution must be used when moving a fryer
containing hot oil or other hot liquids. Do not move the
appliance during use.
- Remove excess surface moisture from foods prior to cooking
to prevent heated oil from foaming out when food is added.
- Never leave the device unattended during use.
CLEANFRY 3000 PROFILTER 7