- Close lid shut to push the capsule inside the brewer. The old capsule will be ejected automatically.
- Select Coffee
- Choose the desired cup size
screen, select Coffee again.
- Press stop to interrupt the brew at any time or wait until finished. A sound may be heard
when it is safe to grab the cup.
HOW TO BREW TEA
- Lift lid open and lay a new coffee capsule in the slot.
- Select Tea
then the desired Steeping recipe.
- Each recipe brews up to 7oz of tea. The stronger the tea the
longer the steeping time.
- Press STOP to interrupt the brew at any time or wait until fini-
shed. A sound may be heard when it is safe to grab the cup.
HOW TO DISPENSE HOT WATER
- Select Water
- Press START to begin. If no selection is made within 10 se-
conds, the display will show main screen again.
- Press STOP to brew. Wait until desired amount is reached or
press Stop. Brewer will stop automatically at 8oz.
6. CLEANING AND MAINTENANCE
WEEKLY
BREW CHAMBER and COFFEE SPOUT
Using the empty capsule provided with the brewer, follow the steps below to rinse the brewing
channels from stain and residue. If empty capsule cannot be found, remove paper filters and
coffee grounds from a spent capsule, and then rinse thoroughly before use.
- Place a 16oz (0.4 liters) cup on cup tray
- Insert empty capsule.
- Select Tea, and then brew Strong Tea into the cup, until finish.
- Empty cup when brew ends, repeat if necessary.
- Eject empty capsule using red stick. Do not use fingers.
dailY
CUP TRAY and WASTE BIN
When display prompts a message to empty capsule tray, follow
these steps:
- Pull waste bin out and dispose of any content;
- Remove cup tray;
- Rinse all parts under warm water only. Do not wash in dishwa-
sher or use chemicals other than common dish soap;
- Wipe off dry with cloth;
- Replace cup tray and waste bin;
- Press OK to continue.
10
.
to brew. If display shows the main
PLACE CUP
SELECT STEEPING RECIPE
MILD
DISPENSING HOT WATER
PLEASE EMPTY CAPSULE TRAY
PRESS OK TO CONTINUE
STRONG