Breg POLAR CARE WAVE Instrucciones De Uso página 8

OPERATING INSTRUCTIONS
Cold compression Pad Application:
(Make sure Breg logo and pad instructions are facing out, away from the injury site)
Breg, Inc.
2885 Loker Ave. East
Carlsbad, CA 92010 U.S.A.
Standard / Large Knee Pad
P: 800-321-0607
760-795-5440
www.breg.com
c 2015 Breg, Inc.
All rights reserved
Made in China C0 0 01 7
REF
US Patents Pending
LOT
Hip Pad
Breg, Inc.
2885 Loker Ave. East
Carlsbad, CA 92010 U.S.A.
P: 800-321-0607
760-795-5440
Shoulder Pad
www.breg.com
c 2015 Breg, Inc.
All rights reserved
Made in China REF C0 0 00 4
LOT
US Patents Pending
Breg, Inc.
2885 Loker Ave. East
Carlsbad, CA 92010 U.S.A.
P: 800-321-0607
Back Pad
760-795-5440
www.breg.com
c 2015 Breg, Inc.
All rights reserved
Made in China REF C0 0 02 0
US Patents Pending LOT
Breg, Inc.
2885 Loker Ave. East
Carlsbad, CA 92010 U.S.A.
Foot / Ankle Pad P: 800-321-0607
760-795-5440
www.breg.com
c 2015 Breg, Inc.
All rights reserved
REF
Made in China C0 0 00 5
US Patents Pending LOT
Universal Pad
Breg, Inc.
2885 Loker Ave. East
(use for knee or shoulder)
Carlsbad, CA 92010 U.S.A.
P: 800-321-0607
760-795-5440
www.breg.com
c 2015 Breg, Inc.
All rights reserved
REF C0 0 01 6
LOT
Made in China
US Patents Pending
12
G 12548 UPDATED ARTWORK FOR BREG BRANDING 24 APR 15
100281 Rev G
Update artwork for Breg branding
F
12548
Simplified artwork
Clarified arrows
C 12548 UPDATED ARTWORK FOR BREG BRANDING
2b
1b
2a
1a
C 12548 UPDATED ARTWORK FOR BREG BRANDING
100235 Rev F
100436 Rev C
F 12548 Updated for Breg Branding 21 APR 2015
100437 Rev C
2b
1b
2a
1a
2b
1b
1a
2a
100242 Rev F
OPERATING INSTRUCTIONS
MZ
Connecting and Disconnecting Cold compression Pad to Unit:
Line up the Breg logos on the

tubing and pad connectors.
Squeeze down gently on the

blue clips.
Push connectors together until

21 APR 2015 MZ they make a "click" sound.
Disconnect the cold compression pad from the unit by pressing the blue clips and gently pulling
24 APR 15 MZ
the connectors apart.

The Breg Polar Care cold compression pad may be disconnected from the unit while it's running
G
and connectors will seal, preventing water from flowing out of tubing. Note: Some dripping during
release is normal.
24 APR 15 MZ
Power Adapter:
F
MZ
C
C
First, take the power supply and appropriate plug adapter from the
packaging.
Then with the power supply plugs folded in vertically (shown on
left), align the power supply and plug adapter (shown on right).
Make sure locking notch is on top, otherwise invert the plug
adapter.
Finally, slide the adapter down gently until it is fully recessed down
to the power supply.
Knee Pad Shown
13