Publicidad
Idiomas disponibles
Idiomas disponibles
Wear safety glasses when working with harmful substances.
Use protective gloves when working with harmful substances.
Wear a protective apron when working with harmful substances.
CAUTION! Danger of fire!
This applies to work with explosives
Warning against the danger of poisoning when working with toxic substances
CAUTION! Risk of electric shock!
CAUTION! Spinning elements!
For indoor use only.
CAUTION! The figures in this manual are illustrative only and may vary in some details from the
actual appearance of the product.
2. Safety of use
CAUTION!
Read all safety warnings and instructions. Failure to follow the warnings and instructions
may result in electric shock, fire, and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions refers to
Digital Mini Centrifuge
Laboratory centrifuge
Mini Centrifuge
2.1.
Electrical safety
a)
The plug of this device must fit into the outlet. Do not modify the plug in any way. Original plugs and
matching outlets reduce the risk of electric shock.
b)
Avoid touching grounded parts, such as pipes, heaters, ovens, and refrigerators. There is an increased
risk of electric shock if your body is grounded and touches the device while exposed to direct rain, wet
pavement, or while working in a damp environment. If water enters the device, there is an increased
risk of damage to the unit and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the device or to pull the plug out of
the socket. Keep the cord away from heat sources, oil, sharp edges, or moving parts. Damaged or tangled
cords increase the risk of electric shock.
e)
If you cannot avoid using the product in a wet environment, use a residual current device (RCD) to
connect it to electrical mains. Using an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows signs of wear. A damaged power cord
should be replaced by a qualified electrician or the manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or the device itself in water or other liquid. Do
not use the product on wet surfaces.
EN
Publicidad
