Steinberg Systems SBS-LAB-107 Manual De Instrucciones página 15

3.1.1. Control panel
SBS-LAB-107 / SBS-LAB-108
SBS-LAB-111:
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory, and intellectual
functions. Place the unit in such a way that the main plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
Before using the unit for the first time, disassemble all parts and wash them as well as the entire unit.
3.3. Working with the device
Prepare test tubes with a substance for centrifugation and place them in the device so that they meet the
following criteria:
• The tube should be filled to a maximum of 75% of its total volume.
• Place the tubes symmetrically in the rotor.
• The test tubes placed opposite each other must be of equal weight.
• Always verify the condition of the tube used.
Do not place cracked or deformed tubes in the unit!
Close the unit cover.
EN
MENU - speed / time button
↑ ↓ - speed / time setting buttons
START / STOP - the device's on/off button
OPEN - lid opening button
P - button for saving the entered data
MENU - speed / time / temperature button
↑ ↓ - speed / time / temperature setting buttons
START / STOP - the device's on/off button