Publicidad
Idiomas disponibles
Idiomas disponibles
•
Use approved eye protection to decrease the risk
of injury from thrown objects. If you use a face
shield then you must also wear approved protective
goggles. Approved protective goggles must comply
with standard ANSI Z87.1 in the USA or EN 166 in
EU countries. Visors must comply with standard EN
1731.
•
Use heavy duty gloves.
•
Use approved respiratory protection. The use of
products such as cutters, grinders, drills, that sand
or form material can generate dust and vapours
which may contain hazardous chemicals. Check the
nature of the material you intend to process and use
appropriate breathing mask.
•
Use tight-fitting, heavy-duty and comfortable clothing
that permits full freedom of movement. Cutting
generates sparks that can ignite clothing. Husqvarna
recommends that you wear flame-retardant cotton or
heavy denim. Do not wear clothing made of material
such as nylon, polyester or rayon. If ignited such
material can melt and cling to the skin. Do not wear
shorts.
•
Use boots with steel toe-cap and non-slip sole.
•
Always keep a first aid kit near.
•
Sparks can come from the cutting blade. Always
have a fire extinguishing available.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly.
•
Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna approved service
agent.
•
Do not change the safety devices.
•
Do not use the product if protective plates, protective
covers, safety switches or other protective devices
are damaged or not attached.
1960 - 002 - 25.08.2023
Read the warning
Functions of the control panel
6
5
4
3
1
1. On/Off button.
2. Accessories On/Off button (not used).
3. Battery status indicator.
®
4. Bluetooth
. Refer to
on page 21 .
5. Temperature warning indicator, high or low. Refer to
LED indicators on the control panel on page 30 .
6. X-Halt warning. Refer to
29
7. Error/Warning indicator. Refer to
page 29 .
To do a check of the control panel
1. Push and hold the On/Off button until the LED
To start the product on page
comes on. Refer to
24 .
2. Push and hold the On/Off button until the LED goes
off.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around
the handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
7
2
®
Bluetooth
wireless technology
Troubleshooting on page
Troubleshooting on
11
Publicidad
