Publicidad
EN
2.1 Technical data
Operating voltage
Idle number of strokes
Weight without recharge-
able battery/cable
Maximum material thicknesses
Steel up to 400 N/mm
Steel up to 600 N/mm
Aluminum up to 250 N/mm
Noise and vibration emission values
Vibration emission value a
(vector sum of three direc-
tions)
Uncertainty K for vibration
emission value
A-assessed sound pres-
sure level L
typically
PA
A-assessed sound power
level L
typically
WA
Uncertainty K for noise
emission values
10
S 114
(2A5)
12 V
2000–4800/min
1.5 kg / 3.3 lbs
1.6 mm
2
0.063 in / 16 ga
1 mm
2
0.039 in / 20 ga
2 mm
2
0.079 in / 12 ga
h
2
5.4 m/s
2
1.5 m/s
70 dB (A)
81 dB (A)
3 dB
Translation of the original operator's manual
2.2 Noise and vibration information
WARNING
Hearing damage if noise emission
value is exceeded
Wear hearing protection.
u
WARNING
Danger of injury if vibration emis-
sion value is exceeded
Select tools correctly and change
u
promptly in case of wear.
Specify additional safety measures to
u
protect the operator against the effect
of vibrations (e.g. keep hands warm,
organization of work processes, pro-
cessing with normal feed force).
Depending on the conditions of use and con-
dition of the power tool, the actual load can
be higher or lower than the specified mea-
surement.
The specified vibration emission value was
measured according to a standardized test
process and can be used to compare power
tools. It can also be used for a preliminary
estimation of the vibration load.
Times when the machine is switched off or is
running, but not actually in use, can signifi-
cantly reduce the vibration load during the
entire working period.
Publicidad
