III. NOTICE - READ BEFORE USE
N. Transit Use (Continued)
WARNING: Remove and secure any items temporarily attached to the mobility base while
in a motor vehicle. Leaving items attached to the vent tray, battery tray or oxygen tank
holder and not securing them properly and separately in a motor vehicle could result in
these items becoming dangerous projectiles in the event of an accident. Additionally,
oxygen tanks contain a highly pressurized gas that vigorously accelerates combustion.
These factors could lead to serious injury or death to the child and/or anyone else in the
vehicle.
•
When using this mobility base as a seat in a motor vehicle, you must remove any items
attached to the vent tray, battery tray or oxygen tank holder and properly secure them
separately.
•
If the mobility base is equipped with an oxygen tank holder never use the mobility base as
a seat in a motor vehicle.
NOTE: To obtain copies of RESNA or ISO standards please contact the standards
organizations below:
International Organization for Standardization (ISO)
www.iso.org
ISO Standards:
ISO 10542-1 Technical systems and aids for disabled or handicapped persons -- Wheelchair tie-
down and occupant-restraint systems -- Part 1:
Requirements and test methods for all systems.
ISO 16840-4 Wheelchair seating – Part 4:
Seating systems for use in motor vehicles.
ISO 7176-19 Wheelchairs – Part 19:
Wheeled mobility devices for use as seats in motor vehicles.
Transit Test Results
•
Front Impact Test: Pass
•
Type of restraint: Vehicle Mounted Three Point
•
Rating for ease of proper positioning a Vehicle Mounted Three Point: Good
•
Securement Point Accessibility Measured Hook Engagement and Disengagement Times:
Pass
•
Tiedown Clear Path Assessment: Pass
•
Rating for Lateral Stability: Good
13