cecotec BOLERO DRESSCODE 9800 INVERTER A Manual De Instrucciones página 111

ENGLISH
E: RINSE
Select the rinse cycle, the rinse time appears on the digital display.
F: DELAYED END
Press the button to set the end time of the washing programme.
G: ONE TOUCH
Press the button to set the "M-Smart" wash cycle.
H: START/PAUSE
Press and hold the button to start or pause a wash cycle.
Adding laundry during the execution of a washing programme
Once the wash cycle has started, press and hold the "START/PAUSE" button again. If the
"DOOR LOCK" indicator light is off , the door can be opened, and laundry can be taken in
or out of the drum.
To resume the wash cycle from the point where it was interrupted, close the door and
press the button again.
WARNING: if the water level or water temperature in the drum is too high, the door lock
indicator light will come on and the door could not be opened.
I: STAINS
Press the button to select the type of soiling of the laundry, the washing machine will
automatically adjust the most optimal way to remove the soiling.
Up to 8 types of soiling can be selected.
M: Display (Fig. 14)
1. Temperature indicator
When a wash cycle is selected, the default temperature value of this programme will
appear on the display, with the temperature indicator light illuminated.
You can change the temperature value by pressing the "TEMP" button. If "- -" is shown on
the display, it means that the washing machine uses cold water only (the internal heating
element for heating water would not be available in this programme).
BOLERO DRESSCODE 9800 INVERTER A/ STEEL 111