DeWalt DW716 Manual De Instrucciones página 5

Clamp: DW7082
Used forfirmly clamping workpiece tothesaw table forprecision cutting.
Dust B ag: D W7053 (Included w ithsome models)
Equipped with azipper foreasy emptying, thedust b ag will c apture themajority
ofthesawdust produced (not s hown).
NOTE: Deflector ondust s pout channels debris t oground. Spout hasaprovision
toattach a vacuum hose tocollect sawdust. Liftdust s pout toconnect hose.
Crown Molding F ence: DW7084
Used f orprecision cutting o fcrown m olding.
Kerr Plate Blank: D W7055
Used t olimit b ack side tear outofmaterial orasa replacement kerr p late.
SAW BLADES: ALWAYS USE 12" SAW BLADES WITH 1"ARBOR H OLES. SPEED
RATING M UST B E ATLEAST 4800 RPM. Never useasmaller diameter blade. Itwill
not b eguarded properly.
BLADE DESCRIPTIONS
TOOTH
APPLICATION MODEL # DIAMETER TEETH GRIND
Construction Saw Blades (thin kerf with anti-stick rim)
General Purpose DW3123 12" 32 ATB
Fine Crosscuts DW3126 12" 60 ATB
Fine Crosscuts DW3128 12" 80 ATB
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts DW7648 12" 60 ATB
Fine crosscuts DW7649 12" 80 ATB
Ultra-fine crosscuts DW7650 12" 96 ATB
Laminates DW7661 12" 80 TCG
Solid surface
and plastics DW7668 12" 80 Mod TCG
Non-ferrous metals DW7666 12" 80 TCG
DW7080
END
PLATE
LOCKNUTS
DW7082
Unpacking Your Saw
Check the contents of your miter saw carton to make sure that you have received all
parts. In addition to this instruction manual, the carton should contain:
1. One No. DW716 miter saw.
2. One DEWALT 12" dia. saw blade
3. One blade wrench in wrench pocket shown in Figure 2.
4. One DW7053 dustbag (some models).
Specifications
CAPACITY OF CUT
50 ° miter left and right
48 ° bevel left and right
0° miter
Max. Height 3.6" (91.5mm)
Max. Width 7.9" (200.7mm)
45 ° miter
Max. Height 3.6" (91.5mm)
Max. Width 5.5" (140mm)
Result Width 7.2" (183mm)
Result Height 2.9" (73.7mm)
Result Width 4.9" (125mm)
Result Height 2.9" (73.7mm)
45 ° bevel- Left
Max. Height 2.3" (58.4 mm) Result Width 7.4" (188mm)
Max. Width 7.9" (200.7mm) Result Height 1.9" (48.3 mm)
45 ° bevel- Right
Max. Width 7.9" (200.7mm) Result Height 1.1" (28mm)
Max. Height 1.6" (40.6 mm) Result Width 7.1" (180.3mm)
DW7051
KNOBS
DW7084
TOP HOLE
(USE FOR
DW716)
BRACKET