Descargar Imprimir esta página

Tornador Z-020RS Manual De Instrucciones página 34

Ocultar thumbs Ver también para Z-020RS:

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Umschalter und Deckel wieder montieren.
Achten Sie vor dem Festziehen darauf, dass
der Umschalter in seiner ursprünglichen
Position fixiert wird.
7. Assemble the switch and the cap and take
care of the correct position of the switch
before you tighten them firm.
7. Vuelva a montar el conmutador y la tapa.
Antes de apretarlos, compruebe que
conmutador está en su posición original.
7. Remonter le commutateur et le couvercle.
Avant de procéder au vissage final, veillez à ce
que le commutateur soit fixé dans sa position
d'origine.
Vers.2023/01
8. Das Rotationsset vorsichtig über den
inneren Schlauch führen und mit dem 12er
Schlüssel festschrauben.
8. Put the rotate set carefully over the tube
and firm it with the 12mm wrench.
8. Coloque el set de rotación con cuidado
encima del tubo interior y apriételo con la
llave de 12 mm.
8. Faire passer le set rotatif par le tuyau
intérieur, et le visser fermement à l'aide
d'une clé de 12.
34

Publicidad

loading