Grundig GSBS15720X Manual Del Usuario página 13

In order to adjust the doors vertically,
according to the position of the door
position
In order to adjust the doors
horizontally,
• Loosen the fixing bolt on the
top
• Screw the adjusting bolt (CW/
CCW) on the side according to
the position of the door
• Tighten the fixing bolt on the
top for the final position
adjusting nut
3.4 Power connection
WARNING:
A
use extension or multi
sockets in power
connection.
WARNING:
B
power cable must be
replaced by Authorized
Service.
When placing two
C
coolers in adjacent
position, leave at least 4
cm distance between the
two units.
•
Our firm will not assume
responsibility for any damages
due to usage without earthing
and power connection in
compliance with national
regulations.
•
The power cable plug must
be easily accessible after
installation.
adjusting nut
fixing nut
fixing nut
Do not
Damaged
DK
SV
NO
FIN
IT
CZ
EL
11