Getting Started - Medisana BTS Instrucciones De Manejo

GB

3 Getting Started

3.1
Inserting/
changing
batteries
3.2
Connecting the
electrodes
20
Press the battery lid on the back of the device using your thumb and slide
it away from the battery compartment. Remove the battery compartment lid.
Insert the three delivered batteries (type AA, 1.5 V, mignon). Pay attention to
the polarity of the batteries as indicated in the diagram in the battery compart-
ment. Put the battery compartment lid back on and slide it back until it locks
back in.
When the batteries become weaker, the battery symbol
lights up. If the device does not go on after pressing the ON/OFF switch
please insert new batteries.
WARNING BATTERY SAFETY INFORMATION
• Keep away from children!
• Do not short-circuit!
There is a danger of explosion!
• Do not dispose of old batteries with your household waste,
but dispose of them at a battery collection station at a
recycling site or in a shop!
The device has four exit channels with connection sockets
leads.
Patient lead
The patient lead has a device plug
two ends with one red and one white connector socket
to the electrodes or . (the colour of the sockets has no meaning for the
electrode connection.)
• Please connect the patient lead
connection socket in the device.
• Plug the electrode plugs into the free red and white connector sockets
the other end of the patient lead.
• If you use all 4 patient leads
device.
Multiple cable
Alternatively you can also use a multiple cable
leads .
A multiple cable has the device plug
with connector sockets for the patient leads.
• Insert the multiple cable
on the device first.
• Then connect two patient leads
patient lead device plug
• Then insert the electrode plugs
on the patient lead .
• Using one multiple cable
exactly two pairs of electrodes (4 electrodes in total) each to one connection
socket on the device.
• Do not recharge!
• Do not throw into fire!
attached at the end and branches into
first with its device plug
, you can connect exactly 8 electrodes to the
together with two patient
at one end and branches in two ends
with the device plug into the connection socket
with the multiple cable
into the multiple cable connector sockets
in the free red and white connector sockets
with two patient leads
on the display
,
for the patient
for the connection
into the
at
. Insert the
.
you can thus connect