3. Adjust the tightness of the running belt. All treadmills need to be
adjusted before leaving the factory and after installation, but there
may be slack after a period of use. Such as: the user pauses and slips
when running. When this phenomenon occurs, adjust the running
belt adjustment bolts in a clockwise direction with a half circle as the
unit, left and right synchronously. If the running belt is too loose, the
running belt and the roller will make your feet slip, but too tight is
not good, and it is easy to increase the load of the motor and damage
the motor, running belt and roller.
4. Running belt deviation adjustment
All treadmills must be adjusted before leaving the factory and after
installation. However, after a period of use, it may still run deviation. The
reasons for the phenomenon are as follows:
① The machine is not stable;
② The user's feet are not in the center of the running belt when exercising;
③ Uneven force of the user's feet.
The deviation caused by man can be restored to normal after a few
minutes of no-load rotation. For deviations that cannot be
automatically restored, the random 6mm Allen key should be used to
gradually adjust the deviation in half-turn units.
Tips: It is mainly maintained by the user in accordance with
the manual. The running belt deviation will seriously damage
the running belt. It must be discovered and corrected in time.
If the walking belt deviates to the
left: adjust the left bolt clockwise
or adjust the right bolt
counterclockwise.
If the walking belt deviates to the
right: adjust the right bolt
clockwise or adjust the left bolt
counterclockwise.
19