HONDA marine Assy 4.3 Manual Del Propietário página 20

(8) Trim Limit Reset
You can reset the trim limit position (trim lower limit position).
• Under the following conditions, Trim Limit Reset is grayed
out and cannot be configured.
– When the engine is running
– When the trim tilt angle sensor is defective
– When DLC (dealer's tool) is connected
1. Use the [ ∧ ] or [ ∨ ] button to select BOAT SET and press the
[ENTER] button.
2. Use the [ ∧ ] or [ ∨ ] button to select Tilt/Trim Preset and
press the [ENTER] button.
3. Use the [ ∧ ] or [ ∨ ] button to select Trim Limit Reset and
press the [ENTER] button.
4. Press the [ENTER] button.
• When the Trim Limit Reset setting is successfully
completed, the COMPLETE pop-up window appears.
• If the Trim Limit Reset setting is not completed, the
FAILED pop-up window appears. Retry setting from step 3.
• When the reset is completed,
Limit Reset.
19
is displayed next to Trim
To "Configuring the settings" (P.8)