Publicidad
Idiomas disponibles
Idiomas disponibles
4. TRANSMITTER "TCOO PLUS"
1
2
3
4
TAB.3
DIP SWITCH SELECTOR
1 - EDGE 1 8K2
2 - EDGE 2 8K2
3 - P. MODE
4.1 - DESCRIPTION OF THE TRANSMITTER
• Do not transport or store the TCOO with batteries connected to the board.
Once it is associated with an RCOO, the transmitter sends the information to the receiver once every second and every time the
sensitive safety edge connected to its terminals detects an impact or is disconnected.
10 - English - Translated from the original language
8
6
7
5
OFF
Safety sensitive edge, mechanical type
(Normally Closed contact) connected to the
EDGE1 input
Safety sensitive edge, mechanical type
(Normally Closed contact) connected to the
EDGE2 input
Not used
WARNING
1.
Housing for the batteries
2.
Connector for connecting the batteries
3.
LED TEST1 and TEST2
4.
TEST1 and TEST2 buttons
5.
DIP-SWITCH selector for configuration (TAB.3)
6.
Terminal block for connecting the safety sensitive board
(EDGE1)
7.
Terminal block for connecting the safety sensitive board
(EDGE2)
8.
Antenna
LED
OFF
TEST1
-
TEST2
-
Safety sensitive edge, resistive type (8K2 OHM)
connected to EDGE1 input
Safety sensitive edge, resistive type (8K2 OHM)
connected to EDGE2 input
ON
Pressing the TEST1
button
Pressing the TEST2
button
ON
6-1620173M - rev. 0 - 30/10/2023
Publicidad
