Craftsman 152.219110 Manual De Instrucciones página 16

FASTENING DRILL PRESS
Figure 7-1
The drill press should be fastened to a supporting
surface, Secure the machine base to the supporting
surface with an M8x1,25x125mm carriage head
screw, 8,5ram fiat washer, 8,Smm lock washer, and
M8x1,25 hex nut through the two hobs (A) located in
the machine base, See Figure 7:1, This win help reduce
the tendency of the drill press to tip over, slide, or walk,
16