Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL USE AND SAFETY WARNINGS
While using electrical tools, several basic safety
precautions must always be followed in order to
reduce the risk of fire, electric shocks and personal
injuries.
Read and understand the manual before start
using this equipment. Save this manual for future
reference.
General
These preventive measures are essential for your
safety. Always use the machine with care in a
responsible manner and taking into account that the
user is responsible for any accidents caused to third
parties or their property.
The machine may only be used by persons who have
read the instruction manual and are familiar with the
handling. Before the first use, the user must be
instructed by the seller or another competent person
about the use of the machine. The instruction manual is
an integral part of the machine and must always be
supplied.
Become familiar with the control devices and the use of
the power tool. In particular, the user must know how
to quickly stop the power tool.
Use the power tool only if you are in good physical and
psychic condition. Do not use the power tool if you are
tired or under the influence of alcohol, drugs or
medication.
If you suffer from any health problem, ask your doctor
about the possibility of working with the power tool.
People who use cardiac devices (pacemakers)
should not use this type of machine or stay with
them without medical advice.
The ignition system of this machine produces a small
electromagnetic field. The influence on some active or
passive medical implants cannot be completely
excluded. To reduce the risk of serious or fatal injury,
people with heart implants should consult their
physician and the implant manufacturer before using
the machine.
Never allow the power tool to be used by children,
persons with limited physical, sensory or mental
capabilities, persons with lack of experience and
knowledge of the power tool or other persons who are
not familiar with the instructions for use.
The power tool may only be used as described in
this operating manual. Any other use which could
be hazardous and cause injury to the user or damage to
the power tool is not permitted.
For safety reasons, any alteration to the power tool
other than the assembly of accessories authorized by
the manufacturer is prohibited. Any changes made void
the warranty.
Information on authorized accessories can be obtained
from your official ITOOLS distributor.
Petrol supply and handling
Petrol is toxic and highly flammable. Keep petrol
only in containers designed and approved for this
purpose. Never use bottles or similar to remove or store
service products such as fuel. Someone, particularly
children, may be mistakenly taken to drink them.
Always screw and tighten tank tops and fuel supply
containers. This reduces the risk of fuel spillage.
Defective covers must be replaced.
Keep petrol away from sparks, flames, heat sources or
other ignition sources. Do not smoke near petrol
containers and grinders, or during the supply process.
Refill and empty the machine fuel tank outdoors only.
The petrol supply shall be carried before the
combustion engine is switched and the cutter is placed
on the ground on a level surface.
Before refueling, shut of the engine, let it cool and open
the cover carefully so as to slowly dissipate the excess
pressure inside the tank.
Don't overfill the fuel tank. In order to allow space for
fuel to expand, never add fuel above the lower edge of
the filler neck. Additionally, comply with the
instructions for use of the combustion engine.
If petrol overflows, immediately clean any spilled fuel.
The combustion engine should only be switched on
after the surface dirty with petrol is cleaned. Any
attempt at ignition shall be avoided until the petrol
vapors have volatilized (dry with cloth).
If the petrol has come into contact with the clothing, it
must be changed.
36
Publicidad
