Kenmore PG-40406S0L Manual De Uso Y Cuidado página 20

Right Frame
2
 Install (4) M4x10 screws as shown to the leg marked "5C". Do not fully tighten the screws at this time.
Leave 1/8-inch gap below the screw head for the rail attachment. (A)
 Attach one end of the side upper rail "6A" to the leg and tighten the screws. Install and tighten another
(1) M4x10 screw. (C)
 Attach one end of the side lower rail "6B" to the leg and tighten the screws. (C)
 Install (4) M4x10 screws as shown on the leg marked "5D". Do not fully tighten the screws at this time.
Leave 1/8-inch gap below the screw head for rail attachment. (B)
 Attach the other end of the side upper rail and the side lower rail to the "5D" leg and tighten the screws.
Install and tighten another (1) M4x10 screw to the side upper rail. (D)
M4x10 Screw
Qty: 10 pcs
A
C
20
B
D