Recommended Use; Composition Of The Unit; Technical Details; Safety Devices - CAMPAGNOLA Energy Day Manual De Uso Y Mantenimiento

3 - SPECIFICATIONS

3.4 Recommended use

The unit was designed for pruning according to the manners and limits previously described.
WARNING!
• Any other use has to be considered improper and potentially dangerous for the operators' safety. This
would make any warranty claims void.
• If it is not used for the purposes it was designed for, the unit may cause serious injury to personnel and
bystanders and damage to equipment and things.

3.5 Composition of the unit

Pos. Description
1 Power-supply cable
2. Battery set
3. Battery backpack
4. ON-OFF switch
5. Recharge connector

3.6 Technical details

• Battery weight: ...........................................................
• Battery voltage:....................................................
• Battery: .......................................................................
• Average battery charge time:
• Battery endurance: .....................................................
• Automatic electronic battery charger model:
(*) This detail depends on the kind of use, of tree and of connected tool

3.7 Safety devices

• Built-in safety device: When not working, after 20 minutes the battery set automatically disconnects from the
power supply, so it has to be started again by means of the switch (4).
• Built-in protection device: Protects the battery set avoiding that the voltage increases or decreases too much,
considering the indicated thresholds.
4
- INSTALLATION

4.1 Starting

• Remove the components from their case.
• Recharge the batteries (2) (see par. 5.3)
• Fit the battery set (2) onto the backpack (3) by following the instructions in par. 4.2
• Plug the cable (1) taking care of the male/female connections

4.2 Fitting the battery set onto the backpack

• Remove the backpack (3) and the battery set (2) from their case.
• Insert into the lower backpack pocket the lower part of the battery back part
• Insert the buckles of backpack into the corresponding holes in the upper part of it (3)
• Adjust the connecting straps of the two parts of the backpack (3) so that it can remain close to the battery back
part
WARNING!
If the backpack (3) has been assembled in the right way, it is possible to reach the battery charger
connector without removing the battery set (2).
26- 32
Function
Connects the power unit to thw battery
Operates the tool
Allows to carry the battery set
Operates the battery set
Allows to charge the battery set
: ........................................ 6-10
..............1905SL
7,35 Kg
16,0 V
Li-FePo4
hours
hours (*)
8
(max. recharging time: 10 hours)
Pict. No,
A
A
A
A
B