Metabo C 12RSH3 Manual página 11

Table 2: Max. sawing dimension
Miter
Left 45°
Bevel
Right 45°
Left 45°
Compound
Right 45°
When cutting the workpiece which has the dimension of "*" there might be some possibility of the lower end of the
circular saw to touch with the workpiece, even if the motor head is located at the lower limit position. Pay attention when
cutting the workpiece. For further details, refer to "PRACTICAL APPLICATIONS" on page 20. Mount the auxiliary board
on the fence surface Refer to "5. Cutting large workpieces" on page 22 (Fig. 27).
Head Turntable
0
Left 45°
0 or
Right 45°
Right 57°
0
0
Left 45°
Right 45°
Left 45°
Right 45°
Max. sawing dimension
Max. height
4-3/16" (107 mm)
*4-11/16" (120 mm)
4-3/16" (107 mm)
*4-11/16" (120 mm)
4-3/16" (107 mm)
* 4-3/4" (120 mm)
2-3/4" (70 mm)
*2-15/16" (75 mm)
1-3/4" (45 mm)
*1-15/16" (50 mm)
2-3/4" (70 mm)
*2-15/16" (75 mm)
2-3/4" (70 mm)
*2-15/16" (75 mm)
1-3/4" (45 mm)
*1-15/16" (50 mm)
1-3/4" (45 mm)
*1-15/16" (50 mm)
Max. width With aux. board
12-1/4" (312 mm)
10-3/16" (260 mm)
8-5/8" (220 mm)
7-1/16" (180 mm)
6-11/16" (170 mm)
5-1/8" (130 mm)
12-1/4" (312 mm)
10-3/16" (260 mm)
12-1/4" (312 mm)
10-3/16" (260 mm)
8-5/8" (220 mm)
7-1/16" (180 mm)
8-5/8" (220 mm)
7-1/16" (180 mm)
8-5/8" (220 mm)
7-1/16" (180 mm)
8-5/8" (220 mm)
7-1/16" (180 mm)
English
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
-
1" (25 mm)
11