Tineco FLOOR ONE S7 STEAM Serie Manual De Uso página 19

Self-cleaning
Brush Roller Cover
②
Squeeze latches on the cover and pull upward to
remove.
While replacing, always latch the brush cover into
place to avoid leakage.
1. Place the appliance on the charging dock after use,
2. Press the self-cleaning button, and the appliance will
3. Once complete, please clean the Dirty Water Tank.
Note:
• Ensure the charging dock is plugged under Self-
• When battery level<10%, press the Self cleaning button,
• When battery level>10%, press the Self-cleaning
• When battery level>20%, press the Self cleaning button,
• Before self-cleaning cycle, please clean the DWT and
①
the sensor will auto-detect the level of dirt.
select the self-cleaning mode based on the actual
battery level for self-cleaning.
And the appliance will begin charging.
cleaning mode:
charging instead of self-cleaning will be activated first.
button, self-cleaning with normal water temperature will
be activated.
self-cleaning with steam will be activated.
ensure the water level in the CWT>40%.
18
Rinse with water.