Publicidad
Idiomas disponibles
Idiomas disponibles
6. WINTERING & STORAGE
6.1 STORE THE MACHINE
Store the machine and its accesories in a dry and well-ventilated place.
When placing the machine out of service for an extended period of time, remove the cleaning
agent and drain all of the water left in the hoses.
7. MAINTENANCE
7.1 CLEANING
CAUTION ! ALWAYS DISCONNECT THE PLUG FROM THE POWER
SOURCES BEFORE CARRYING OUT ANY WORK ON THE APPLIANCE.
Cleaning the product: illustration 4.1
Clogging of the spray tips causes the pump pressure to be too high and cleaning is immediately
required. You can clean the spray tips by carefully inserting a needle, or a thin, sharp instrument
(e.g. paperclip) into the tip to rid it of deposits.
You can also had the cleaning tip on the accessories.
Cleaning the filter: illustration 4.2 and 4.3
Inspect the intake filter before each use, and clean in accordance with the instructions.
Inspect the seal status of inlet nozzle and spear, remove dirt and debris from the seals, if there
have any crack/damage marks on it, which will lead the water leakage, please replace with the
new one accordingly.
We additionally offer some spare seals in the machine for the free replacement. Put the nozzle,
spear, inlet nozzle in a clean place, protected from damage.
7.2 MAINTENANCE SCHEDULE
Part
Action
CHECK
Hose
REPLACE
CHECK
Nozzle
REPLACE
Before/After
Each 10h
each usage
used
X
X
197
After
Comments
wintering
X
When it's
necessary
(damaged)
X
When it's
necessary
(damaged)
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Publicidad
