Bianchi SPECIALISSIMA RC Manual Suplementaria página 8

SEAT POST CLAMP/EXPANDER
The seat post clamp/expander provided is designed specifically for use with the Specialissima RC, PRO and COMP frames. Without this
component, it is not possible to lock the seat post in the desired position. (image 1D).
Pay close attention to the warnings given below. Failure to comply with the warnings and provisions contained in this data sheet exempts
the manufacturer from any liability.
To change the saddle height, lift the rubber cover on the frame to access the M5 screw on the clamp/expander; loosen this M5 screw and
adjust the height of the seat post.
Image 1D
WARNING!!
Do not extract, move or adjust the seat post (e.g., to adjust the saddle height) without having loosened the screws on the clamp/
expander!
Once the saddle is adjusted to the desired height, tighten the M5 screws and respect the recommended torque value of the clamp/
expander (6 Nm). Next, reposition the rubber cover in its original position.
INFORMATION!
For optimum grip and to eliminate slippage between the seat post and the frame, place a layer of gripper paste on the part of the
expander that is in contact with the seat post. (the gripper paste is included with the product).
DANGER!
The clamp is equipped with M5x35 mm screws; please only use the specified screw. Using a different screw can compromise the
tightness of the seat post clamp/expander and cause the seat post to drop suddenly, resulting in possible falls.
DANGER!
Always comply with the torque levels specified on the seat post clamp/expander. Failure to comply with the recommended torque
levels may lead to malfunction and cause the rider to fall.
SEAT POST
The carbon fibre D Shape seat post is specifically designed for the Specialissima
RC, PRO and COMP frame to ensure optimum integration between seat post and
frame. Each frame size is supplied with a seat post of the correct length and design
to protect the integrity of the frame.
Always observe the maximum and minimum insertion limits.
280 mm seat post > 47 cm frame
300 mm seat post > 50 cm / 53 cm frame
350 mm seat post > 55 cm / 57 cm / 59 cm frame
WARNING!!
When removing the seat post never exceed the safety limit indicated on the
component. (image 1E)
8
Image 1E