Bianchi SPECIALISSIMA RC Manual Suplementaria página 9

ELECTRONIC SHIFTER BATTERY
If using the Shimano Di2 electronic shifting system, the battery is integrated into the seat post using a specific rubber interlocking
system (Image 1F and 1G). Always take care when removing the seat post to avoid damaging the battery or the transmission system
cables.
Image 1F
WARNING!!
Be careful to avoid damaging the cables when extracting the seat post from the frame as the cables may be too short to allow this.
WARNING!!
Check that the battery is securely attached inside the seat tube. Incorrect assembly may cause the battery to fall and become
damaged.
HOW TO USE STABILISERS
Bianchi bike frames are almost always compatible with stabilisers.
Stabilisers must be positioned on the frame at the attachment points of the rear wheel hub only. All adjustments made to the bike are
at the owner's own risk. Bianchi does not provide any guarantee or assume any responsibility in the case of product damage.
WARNING!!
Before purchasing or using stabilisers, always check that the bike and the stabilisers are fully compatible. Bianchi does not provide
any guarantee or assume any responsibility in the case of product damage.
ADDITIONAL TECHNICAL INFORMATION
Not all components available on the market are compatible with the Specialissima frame.
Not all devices available on the market, such as child seats, stabilisers and bike cargo trailers, are compatible with the Specialissima
frame.
Only the components specified on the product have been tested by Bianchi. Please check design and compatibility before purchasing
new components and devices.
WARNING!!
Before purchasing and assembling products and/or devices, always check that the bike and the components are fully compatible.
Bianchi does not provide any guarantee or assume any responsibility in the case of product damage.
Image 1G
9