bora CIW 1 Instrucciones De Montaje Y De Uso página 33

Installation
Insertion of build-in appliances
► Prior to inserting the cooktops, please insert the
cover frame of the cooktop extractor hood (1) in
the worktop cut-out.
► To balance out the higher glass thickness of the
induction glass ceramic wok and the tolerances,
please use the provided height adjustment
plates (2).
► Afterwards the appliance can be inserted (3).
Please check that all build-in appliances are
flush and adjust height using the height
adjustment plates if necessary.
Build-in appliance attachment
► Afterwards, attach the appliances with the
mounting brackets.
► For
hygiene reasons,
appliances overleaf with temperature-resistant
silicone/sealant. Please observe that also the
section between the devices must be seamed
(1). Remove excess sealant to ensure a clean
seam pattern (2).
Use sealing tape (1)! The silicon bonder (2)
must not touch any place under the
supporting surface. It is otherwise not
possible to pull the hob out later. Failure to
follow these instructions leads to voiding of
warranty.
g
seam the build-in
33