Publicidad
Start the interval log mode
1 Press
readings are automatically recorded into the multimeter's memory at the interval
specified in the Setup menu.
Figure 3-8
2 Press
The maximum number of readings that can be stored for the interval log is 10000 entries.
When all entries are occupied,
is pressed for more than 1 second.
The interval and event log share the same memory buffer (10000 entries). Increased usage
of the interval log entries will lead to the decrease of the maximum entries for the event log,
and vice versa.
See the Reviewing Previously Recorded Data (View) section later in this manual to review
or erase the recorded entries.
When the interval log recording session is running, all other keypad operations are
NOTE
disabled; except for
the recording session. Furthermore, APO (Auto Power-Off) is disabled during the recording
session.
Keysight U1281A/U1282A User's Guide
for more than 1 second to start interval log mode.
Hz
Save
and the log entry number are displayed at the top of the display. Subsequent
Interval log display
for more than 1 second to exit the interval log mode.
Hz
Save
, which, when pressed for more than 1 second, will stop and exit
Hz
Save
will be shown in the secondary display when
Multimeter Features
3
Hz
Save
109
Publicidad
