4
Multimeter Setup Options
Using the Setup Menu
The multimeter's Setup menu allows you to change a number of nonvolatile preset
features. Modifying these settings affects the general operation of your multimeter across
several functions. Select a setting to edit to perform one of the following:
– Switch between two values, such as on or off.
– Scroll through multiple values from a predefined list.
– Decrease or increase a numerical value within a fixed range.
To contents of the Setup menu are summarized in Table 4-2.
Table 4-1
Legend
The multimeter will automatically exit the Setup menu after 30 seconds of inactivity.
NOTE
116
Setup menu key functions
Description
Press
position to access the Setup menu.
Shift
Esc
Press and hold
While the menu item is flashing, press
Press
Hold
Press
digit of the menu item (in the primary display) will flash to indicate that you can
now change the values shown in the primary display.
Vsense
Press
multiple values from a list, or to decrease or increase a numerical value.
Hz
While the menu item is flashing, press
Save
Shift
while turning the rotary switch from the OFF position to any ON
Esc
until the multimeter restarts to exit the Setup menu.
Shift
Esc
Esc
or
on
to step through the menu items.
Hold
Vsense
or
at each menu item to change the preset settings. The last
Vsense
or
again to switch between two values, to scroll through
Hz
Keysight U1281A/U1282A User's Guide
to discard your changes.
Shift
to save your changes.
Save