KYT KX-1 RACE Manual De Instrucciones página 39

After fitting the parts verify that the mechanisms are positioned correctly and
tightly fixed to the shell. Then fit the visor and adjust it as specified in the above
paragraphs.
EN
After fitting the mechanism verify that the visor is tightly fixed to the helmet, that
it rotates freely and that it locks correctly into the locking positions.
If this doesn't happen and the rotation mechanism of the visor doesn't work cor-
rectly, do not use the helmet and contact authorized KYT personnel only.
SETTING AIR FLOW – CHIN AIR INTAKE
1 Remove the cover by levering on the appropriate hole located on the chin inside the helmet.
HOOKING PLUG SEAT COVER HOOKS
39