KYT KX-1 RACE Manual De Instrucciones página 42

HYDRATION SYSTEM
EN
1 Insert the pipe in the hydration system.
T
2 Slide the pipe between the check pad and the
internal part of the helmet, following the trim at
the bottom.
Insert the pipe without the nozzle in its seat T on
T
the check pads, placed in the left bottom of the
helmet. Slide the pipe in its seat on the check pad
following the bottom trim T1.
T1
3 Insert the pipe in its house T2.
Push it until it comes out of the appropriate exit hole T3 and then insert the relative nozzle into
the pipe.
T3
T2
42