Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Verify that the part was assembled correctly by checking that:
> the cheek pad is firmly locked in position
> the strap is completely free inside the hole and is not blocked under the cheek pad
during assembly.
Only the correct assembly of the cheek pad and the correct positioning of the strap
will assure the proper efficacy of the retention system. During use, the locking lever
must always be fixed in lock position; if it cannot be locked correctly do not use the
helmet.
VISOR — Q — R — S
The visor must be periodically cleaned and controlled. If the visor is dirty and/or has bad scra-
tches on the surface there could be unusual light reflections or deviations, which may jeopardize
safety. Immediately replace the visor if there are these problems.
How to operate — Figure 10
The Visor (Q) has to be operated only by using the lifting lever (R). Do not open it using other
areas to avoid causing accidental damages (scratches) or dirtying the field of vision.
12
Q
S
R
M
N
R
Q
S
O
P
FIGURE 9
FIGURE 10
Publicidad
