Publicidad
Idiomas disponibles
Idiomas disponibles
Opening the visor: push lightly the lifting lever outwards (R), to unlock the tab from its seat (S)
under the gasket and lift it up.
Closing the visor: to lock the visor in position, lower it until the tab is blocked inside its seat (S)
in the gasket.
There are two locking positions: intermediate and visor completely open.
The visor must be opened or closed completely up to the lock position. The visor is correctly
locked into position when it clicks into its seat. To unlock the visor from the lock position just
follow the above procedure, lightly press during initial phase of the movement until the visor is
unlocked.
While riding the motorcycle the visor must never be left in the intermediate posi-
tions; it must always be locked in the locking positions.
Removing the visor — Figure 11A
1) Open the visor until it is completely open.
2) Slide the lever (T) and Keep it in tension (T)
3) Remove the visor from its mechanism by rotating and at the same time pull it outwards. Repeat
the operation on the opposite side.
1
T
2
T
1
2
3
T
FIGURE 11 A-B
EN
A
B
13
Publicidad
