Publicidad
Idiomas disponibles
Idiomas disponibles
After fitting the parts, verify that the mechanisms are positioned correctly and tightly
fixed to the shell. Then fit the visor and adjust it as specified in the above paragraphs.
After fitting the mechanism verify that the visor is tightly fixed to the helmet, that it rotates freely
and that it locks correctly into the locking positions.
If this doesn't happen and the rotation mechanism of the visor doesn't work
correctly, do not use the helmet and contact authorized personnel only.
SUN VISOR — X
How to operate — Figure 13
The Visor has to be operated only by using the lifting lever (Y)
1) Opening the sun visor: Slide the lifting lever (Y)
2) Closing the sun visor: Slide the lifting lever (Y) in the opposite direction
Do not use the sun visor in rainy days, while driving through a tunnel, underpass or
when the light is low.
Y
X
1
Removing the sun visor — Figure 14
Open the visor until it is completely open.
Put the sun visor in the use mode. Release the sun visor by pushing it outwards and pulling it out
from its seat in the shell. Repeat the operations on the opposite side
Assembly
Hook the sun visor by pushing inwards and inserting it in the correct shell seat, repeat the opera-
tions on the opposite side.
X
2
Z
X
Y
FIGURE 13
FIGURE 14
EN
15
Publicidad
