KYT Skyhawk Manual De Instrucciones página 8

EN
THANK YOU FOR CHOOSING KYT
Read this instruction carefully before using your helmet. This manual is very important for your
safety and for your helmet life. Helmets have been conceived, designed and manufactured using
the most advanced technologies for motorbike rider's maximum safety, Helmets have been
created for motorcycle use only and cannot guarantee suitable protection if used for other
purposes or sports. In case of an accident, especially with strong impacts, a helmet will not avoid
all risks of fatal injuries. Do not expose your helmet to intense light sources especially if the color
is fluo as yellow, orange, red or green because the resistance to the light for the this kind of color
is very low and it may fade.
Helmet is in compliance with the standards valid in the country of purchase
INFORMATIONS FOR USERS
A. No Helmet can protect the user against any type of crash. Certainly the protection capacity
of the helmet is not endless, some crashes may generate such high stress that even the energy
absorbed by the helmet is not enough to protect the user from injuries. No helmet, even top
quality helmets, can protect the head against any kind of impacts.
B. The helmet is designed to be worn with retention straps securely fasten. Do not wear
scarves or neck guards which could make the strap slide and let the helmet fall off in case of a
crash.
C. Do not stick or glue any element if not recommended by the producer.
D. Do not cut or punch the shell.
E. The function of the helmet is to reduce the stress from user's head in case of a crash; this
happens through a partial destruction and/or deformation of its components (mostly external
shell and internal polystyrene). In this way, part of the energy generated by the impact, is absorbed
by the helmet components in order to reduce vibrations and stress from the user's head,
eliminating or limiting the possibility of injures.
F. Inner liner is essential to assure the best helmet functionality. The integrity of the shell and of
the inner are essential to ensure the maximum performance in terms of safety.
G. The helmet may be damaged by using paints, stickers, petrol or cleaning products even if the
damage is not visible.
H. Do not use a helmet that suffered severe blows even though the damage is not readily
visible; if the helmet is damaged it must be replaced.
14
SAFETY WARNING!
1. READ THIS INSTRUCTION CAREFULLY
AND STRICTLY OBSERVE IT BEFORE USING
YOUR NEW HELMET.
This helmet has been conceived and manufactured to
protect your head in case of shock thanks to the shock
absorption ability of the different materials used.
2. NEVER USE AGAIN A HELMET THAT HAS
SUFFERED A SHOCK
A helmet that has suffered a shock must not be used
anymore. Sometimes damages are not visible from
the outside however the internal materials may be
damaged. The helmet is designed for shock absorption
by alteration and partial destruction of some parts: in
case of further shock it won't be able to protect you
with the maximum safety. Return your helmet to the
manufacturer for an expert inspection or replace it with
a new one.
3. PROPER WEARING.
WARNING! Carefully select the size of your helmet
as it is very important for your safety. Ask for your
authorized dealer's advice when choosing your helmet
suitable size. In order to check your helmet proper size
follow the instruction below. Never use a helmet that is
too small or too big for your head.
4. HOW TO CHECK YOUR SIZE
A safe helmet should close-fit your head. To check the
size wear your helmet and shake your head left and
right and forward/back. Try to move it with your hands.
lf it slips it means it is too big. Therefore try a smaller
size. lf the pressure on your head bothers or hurts you,
try a bigger size. You must carry out the "ROLL-OFF
TEST": Fasten your helmet, Hold onto the chin strap
with one hand and using the other one try to take
it off by strongly pulling from the back. lf the helmet
comes off, the size is not correct, Check that you can
turn your head freely and that your side view is not
limited. Check if you can breathe freely and that nothing
obstructs the air flowing inside the helmet.
EN
- A -
- B -
15