Familiarise Yourself With The Appliance; The Control Panel; Hotplates; Residual Heat Indicator - NEFF T4.D.0 Serie Instrucciones De Uso

Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.

Familiarise yourself with the appliance

These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.

The control panel

Control surfaces
Pressing a symbol activates its corresponding function.

Hotplates

Hotplate
Single hotplate
$
Double hotplate
ð
Triple hotplate
ò
Use only cookware suitable for induction cooking; see the section on suitable cookware.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
&RQWURO SDQHO
IRU
PDLQ VZLWFK
³ FKLOGSURRI ORFN
&RQWURO SDQHOV IRU
 WLPHU IXQFWLRQ
Turning on and off
Always use cookware of a suitable size.
This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
The hotplate is switched on automatically by using a pan with a base that
matches the size of the outer area (
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Automatic detection on double or triple hotplates
These hotplates can detect cookware of different sizes.
Depending on the material and properties of the cookware, the
hotplate will adapt automatically, switching on part or all of the
hotplate and supplying sufficient power to obtain good cooking
results.
,QGLFDWLRQV IRU
SRZHU OHYHO³É
IXQFWLRQDOLW\ ¯
UHVLGXDO KHDW ‡¤
SRZHUERRVW IXQFWLRQ Æ
&RQWURO SDQHOV IRU
SRZHU OHYHO VHOHFWLRQ
Notes
The settings will not change if several symbols are pressed at
■
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
■
proper functioning.
Even when switched off, the
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
indicators and the selected power level will appear alternately.
&RQWURO SDQHO
IRU
FOHDQLQJ SURWHFWLRQ
IXQFWLRQ
or ) selected for use.
ð ò
/ light will remain on as long as
œ •
/
œ •
19