Powerboost Function; Use Limitations; To Activate; To Deactivate - NEFF T4.D.0 Serie Instrucciones De Uso

Powerboost function

The Powerboost function can be used to heat large amounts of
water more quickly than the power level

Use limitations

This function is available on all hotplates, provided that no other
hotplate in the same group is operating, (see picture).
Otherwise, the display of the selected hotplate will flash
and ; then it will automatically set the power level
Š
In group 2, the powerboost function may be activated at the
same time for all hotplates (see picture).
*URXS 



Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Turning off a hotplate automatically

Enter the cooking time for the required hotplate. The hotplate
turns off automatically once the time has elapsed.
How to program
Select the required power level.
1.
Press the symbol. The
3
2.
lights up. is displayed in the time program function
‹‹
display. To select another hotplate, press the
several times until the
x
lights up.
Press the + or - symbol on the time program function.
3.
The basic setting appears:
+symbol: 30 minutes.
- symbol: 10 minutes.

Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to count down.
Once the time has elapsed
The hotplate switches off. The beep sounds, and in the time
program function display
‹‹
The indicator lights up on the hotplate display. Pressing the
x
symbol turns off the indicators and stops the beeping.
3
22
.
Š
.
Š
*URXS 

 


*URXS 
indicator of the hotplate
x
3 symbol
indicator for the desired hotplate

appears for 10 seconds.

To activate

Select the power level
1.
Press the + symbol. On the hotplate, the
2.
appear.
The function has been activated.
˜

To deactivate

Press the - symbol. The
hotplate will return to the
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Changing or cancelling the time
Press the symbol several times until the required
3
indicator lights up. Change the cooking time using
x
the + or - symbols, or set to
Notes
If a cooking time has been programmed for several
■
hotplates, it can be set to display all the time values. To do
this, press the
for the required hotplate lights up.
Any cooking time can be programmed for up to 99 minutes.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time can be changed or cancelled for any
hotplate:
Press the 3 symbol several times until the required
x indicator lights up. Change the cooking time using
the + or - symbols, or set to

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
Press the
3
1.
lights up. ‹‹
display.
Press the + or - symbol on the time program function.
2.
The basic setting will appear.
+symbol: 10 minutes.
- symbol: 5 minutes.
Set the time required using the + or - symbols.
3.
After a few seconds, the timer will start to count down.
.
Š
˜ symbol will disappear and the
Š power level.
.
‹‹
3 symbol several times until the
.
‹‹
symbol several times until the
is displayed in the time program function
indicator will
˜
x indicator
indicator
S