TOPDON Phoenix Max Manual Del Usuario página 28

1.3.5 Actuation Test
This function is used to find out whether a specific subsystem or component
in vehicles goes well or not, by testing output elements instead of checking
in ignition status.
1.3.6 Special Function
This function is used for data writing operation of electronic control
unit. They all belong to this category, such as ECU data calibration, ECU
Programming etc. Some Resetting functions are also included in this part.
2. AutoScan (Intelligent Diagnosis)
Plug the Phoenix MDCI Pro dongle into the vehicle's DLC port.
Tap "AutoScan" on the Home Menu after connecting to the vehicle.
The tool will start the AutoScan procedure, and automatically read the vehicle's VIN
information, as shown below:
Note: A highly stable and solid network connection is required for successful VIN access.
3. Services
TOPDON Phoenix Max is equipped with maintenance services to be very beneficial for
technicians and mechanics working in the automotive repair industry.
3.1 OIL (Maintenance Light Reset)
This function enables you to reset the oil service lamp for the engine oil life system,
which calculates an optimal oil life change interval depending on the vehicle driving
conditions and weather events.
25