TOPDON Phoenix Max Manual Del Usuario página 31

This function can match the anti-theft key after replacing the ignition key, ignition
switch, instrument cluster, engine control unit (ECU), body control module (BCM), and
remote control battery.
3.10 INJEC (Injector Coding)
This function can write injector actual code or rewrite code in the ECU to the injector
code of the corresponding cylinder, so as to have more accurately control or correct
cylinder injection quantity.
It needs to be performed in the following cases:
• After the ECU or injector is replaced.
3.11 TPMS (Tire Pressure Reset)
This function can reset the tire pressure and turn off the tire pressure fault indicator
when the car tire pressure fault indicator light is on.
3.12 SUS (Suspension Level Calibration)
This function can adjust the vehicle body height sensor for level calibration after
replacing the vehicle height sensor or control module in the air suspension system, or
when the vehicle level is not correct.
3.13 AFS (Adaptive Front-lighting System Reset)
This function enables you to initialize the adaptive headlamp system.
3.14 GEAR BOX (A/T Learning)
This function helps complete the gearbox self-learning to improve gear shifting quality.
It needs to be performed in the following cases:
• When the gearbox is disassembled or repaired (after some of the car battery is
powered off), which leads to shift delay or impact problem.
3.15 SUN (Sunroof Initialization)
This function enables you to set the sunroof lock off, or closed when it rains; the sliding
sunroof memory function; the temperature threshold outside the car, etc.
3.16 EGR (EGR Adaption)
This function can learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or
replaced.
3.17 ODO (ODO Reset)
This function can copy, write, or the value of kilometers in the chip of odometer, so that
the odometer shows the actual mileage.
It needs to be performed in the following cases:
28