Velleman KNS130 Manual Del Usuario página 16

12.13 LED and spinning LED with separate switches
Wiring Sequence
4-18-53, 17-2, 52-47, 46-1-3
46 47
1
Complete all wiring connections as indicated in the sequence. If you switch on the main switch, the
spinning LED light will be on. If you press the push switch, the LED will light up. They are controlled by
separate switches so you can turn them on and off individually.
12.14 Basic circuit operation of LED
Wiring Sequence
4-17, 18-49-53, 52-48-51-8, 7-50-3
52
48
49
53
Complete all wiring connections as indicated in the sequence. Switch on the main switch. You will see
that the small LED will light up but the large LED will not. When you press the push switch, you will see
the large LED will light up but the small LED will be turned off.
12.15 Spinning LED light in advance circuit operation of LEDs
Wiring Sequence
4-17, 18-49-53-16, 15-48-51-8, 7-50-52-2, 1-3
V. 01 – 01/02/2024
52 53
2
17 18
3 4
50
51
100Ω
7
8
18 17
KNS130
3
4
16 ©Velleman nv