Velleman KNS130 Manual Del Usuario página 23

v+
37
35
38
40
42
16
15
Complete all wiring connections as indicated in the sequence. Switch on the main switch. The digital
segment LED will display "I". If you access the reed switch with the magnetic pole, the digital segment
LED will display "L"; or if you press the push switch, the digital segment LED will display "F". And if you
activate both switches at the same time, it will display "E".
12.29 Light control seven-segment LED display – C (Dark Type)
Wiring Sequence
3-18, 11-25-14, 4-36-12, 13-17-26-8, 7-41, 27-35-37-40-42
12
11
27
25
26
14
13
Complete all wiring connections as indicated in the sequence. Switch on the main switch. If there is
enough light in the room, then only the power indicator on display lights up. Cover the light sensor and
the display will show letter C. If you uncover the light sensor, the letter C will disappear..
12.30 Light control seven-segment LED display – E (Light Type)
Wiring Sequence
3-18, 41-7, 17-26-12-8, 11-13-25, 4-36-14, 27-35-38-37-40-42
V. 01 – 01/02/2024
8 7
100Ω
39
43
41
53
52
v+
37
35 39
38
40 43
7
42 41
8
KNS130
18
17
4
3
4
3
18
17
23 ©Velleman nv