Velleman KNS130 Manual Del Usuario página 17

Complete all wiring connections as indicated in the sequence. Switch on the main switch. You will see
that the blue LED will light up but the other LEDs will not light up. When you access the reed switch with
the magnetic pole, the blue LED will be off and now only the yellow LED will light up. Press the push
switch. This time only the spinning LED will be on!
12.16 LEDs Combination
Wiring Sequence
4-52-51, 50-16-48, 49-53-47, 46-15-17, 18-3
47 46
53
49 48
52
51 50
3
4
Complete all wiring connections as indicated in the sequence. Switch on the main switch. Pressing the
push switch, or accessing the reed switch with the magnetic pole, or doing both at the same time will
lead to different LED performances!
12.17 Function of a diode
Wiring Sequence
4-18, 17-45, 44-2, 1-3
1
4 3
18 17 45
V. 01 – 01/02/2024
16 15
18 17
2
4 3
44 18
KNS130
1 2
17 44 45
17 ©Velleman nv