Publicidad
Idiomas disponibles
Idiomas disponibles
8. Operation
DANGER of burns!
During operation, the surfaces of the de-
vice may become hot. Do not touch any
hot parts of the device such as the air
outlet 13 on the back.
Use oven gloves or potholders to touch
the pan 10 and frying basket 5.
During frying, hot steam escapes from
the air outlet 13. Be careful not to put
your hands into the steam.
Do not move or transport the hot air fry-
er while it is switched on.
WARNING! Risk of material damage!
The device must not be operated under
any circumstances without the frying
basket 5!
8.1
Power connection
• When the device is set up, plug the
mains plug 11 into an earthed wall
socket that corresponds to the specifica-
tions on the rating plate. The wall socket
must also be easy to reach after switch-
ing on the device.
- All indications in the touch display 3
light up briefly.
- A double acoustic signal is triggered.
- The symbol for the Start/Stop but-
ton 20 is lit. The lit symbol indi-
cates standby mode.
8.2
The touch display
On the touch display 3 there are symbols
that only display functions, e.g. the heating
symbol
24.
Other symbols (also) represent a button, e.g.
the Start/Stop button
tons' is used in this instructions for buttons and
keys to make the text easier to read.
20. The term 'but-
8.3
Switching on/off
• Press the Start/Stop button
switch on the device from standby
mode.
- The display 3 shows the program
symbols 14 and the lower bar with
the buttons 18 – 23.
- The preset temperature 180 °C and
the preset cooking time 15 min are
displayed flashing alternately.
NOTE: if you switch off the device by hold-
ing down the Start/Stop button
mediately after switching it on, the fan will
be switched on for approx. 1 minute.
• Press the Menu button
ly to select the desired program.
• Press the Start/Stop button
in order to start the device.
- The heating symbol
played.
- The fan symbol
- The set temperature and cooking time
are displayed alternately.
- The cooking time is counted down.
- The selected program symbol 14
flashes.
• While the device is running, press and
hold the Start/Stop button
switch the device to standby mode.
- An acoustic signal sounds.
- The fan continues to run for approx.
1 minute and the fan symbol
flashes.
- The display 3 only shows the
symbol
20.
• To completely switch off the device and
disconnect it from the mains, pull out the
mains plug 11.
20 to
20 im-
23 repeated-
20 again
24 is dis-
25 flashes.
20 to
25
79
GB
Publicidad
