Publicidad
Idiomas disponibles
Idiomas disponibles
82
FUEL FILTER OR SIFTER
ATTENTION: Some machines may be equipped with fuel filters already installed in the fuel filler
opening of the tank. If the fuel filter no longer meets its function, replace it.
FUEL FILTER OR SIFTER INSPECTION AND CLEANING
Check the fuel filter for dirt, debris, etc. Clean or replace the fuel filter as necessary.
To clean the fuel filter:
•
Clean the filter with a clean solvent.
•
If possible, use compressed air to facilitate cleaning of any blockages.
TO REMOVE OR INSTALL THE FUEL FILTER OR SIFTER
To remove the fuel filter:
1.
Place the machine horizontally on a flat, level surface with the fuel filler cap facing up.
2.
Remove the fuel filler cap by turning it to the left.
3.
Pull the filter from the tank filler opening.
To reset the filter:
1.
Place the fuel filter in the fuel tank filler port. If other parts are used, make sure everything is properly
installed.
2.
Replace the fuel cap.
A
B
Publicidad
